AEG Construction Ltd

AEG Construction Ltd delivers compliant whole-house retrofit, funded energy upgrades and sustainable construction solutions, supporting properties across the UK with future-ready, energy-efficient outcomes.

icon_widget_image Mon – Fri: 9AM – 12PM / 1PM – 5PM icon_widget_image Bateman Court, Bateman St, Derby DE23 8JQ, United Kingdom icon_widget_image 01332 389 311 icon_widget_image info@aegconstruction.co.uk
MVHR ventilation commissioning and airflow maintenance guide

MVHR Filter Maintenance: What Homeowners Should Check and Record

Diagram explaining domestic ventilation commissioning and airflow

Home ventilation maintenance

MVHR Filter Maintenance: What Homeowners Should Check and Record

A practical UK guide to checking heat-recovery ventilation filters, choosing the correct replacement and knowing when a routine task has become a technical problem.

Start with the manualFilter type, orientation, access and replacement interval are unit-specific.
Keep the settings stableChanging filters should not mean altering valves, fan speeds or commissioning controls.
Leave a recordDate the change and note the filter reference, condition and any recurring warning.

An MVHR system—mechanical ventilation with heat recovery—moves stale, humid air out of selected rooms while supplying filtered outdoor air to living spaces and bedrooms. The heat exchanger transfers useful heat between the air streams without mixing them. For that process to work as designed, air must be able to pass through the correct filters.

Filter maintenance is usually one of the few tasks intended for an occupier, but it still needs to be done carefully. The wrong filter, a badly seated frame or a change to the system’s airflow controls can undermine performance. This guide focuses on what a homeowner can reasonably check and record. It does not replace the instructions for the exact MVHR unit or a professional ventilation service.

The safe starting point: identify the manufacturer, model and filter reference before opening the unit. If those details are missing, obtain the correct manual or ask the installer or manufacturer. Do not buy a filter solely because its dimensions appear similar.

Why MVHR filters need routine attention

Most domestic MVHR units have filters serving the incoming and extract air paths. Their job is to protect the system and reduce the amount of airborne material entering the supply side. Dust loading gradually increases resistance. If a filter is damaged, incorrectly fitted or heavily loaded, the system may work harder or deliver less air than intended.

A filter warning is therefore a maintenance prompt, not proof that a new filter alone will solve every airflow problem. A timer-based reminder may simply have reached its preset interval. A pressure-based warning may respond to increased resistance. The meaning depends on the model, so the manual remains the authority.

Maintenance is also part of a usable handover. Regulation 39 of the Building Regulations requires the person carrying out relevant work to give the owner sufficient information about the building’s ventilation system and its maintenance so that it can be operated to provide adequate ventilation. In practice, the household should know where the MVHR unit is, how it is safely accessed, what filters it uses and which settings should be left alone.

Home ventilation controls and maintenance information
Controls and maintenance information should be clear enough for the people who actually occupy the home.

How often should MVHR filters be checked or changed?

There is no safe universal replacement interval for every unit and every home. The current GOV.UK guide for ventilation in an existing home tells owners to follow the manufacturer’s instructions and says whole-house mechanical ventilation filters are usually replaced annually. Some specialist guidance recommends more frequent attention; the Passivhaus Trust’s MVHR maintenance guide says filters should be checked, cleaned or changed regularly, typically every six months, with yearly changes possible for some sites and systems.

Those figures are not contradictory rules for all systems. Filter loading depends on the unit, filter type and the environment around the property. Pollen, traffic pollution, nearby construction, agricultural dust, pets and an unusually dusty indoor period can all justify an earlier inspection. The correct approach is to follow the specified schedule, inspect at sensible intervals and use the condition of the filters and any system warning as evidence.

Do not “upgrade” the filter grade without technical advice. A filter with different resistance may change airflow or fan duty. Use the manufacturer-approved reference for the unit, or obtain written confirmation of an equivalent.

A careful homeowner filter-change sequence

These steps are deliberately general. The model-specific manual takes priority, particularly for isolation, panel removal, filter direction and resetting a maintenance alert.

Confirm the exact unit and filter

Record the make, model and serial number. Match the filter reference, dimensions, frame and stated grade to the manual or the manufacturer’s approved parts list. If the existing filter has no readable reference, do not guess.

Read the shutdown instructions

Use only the isolation or standby procedure stated by the manufacturer. A wall controller, local isolator and mains supply are not interchangeable instructions. If safe access involves live electrical parts, stop and arrange competent help.

Photograph the existing arrangement

Before removal, take a clear image of the filter positions, labels and airflow arrows. Some units use different filters on the supply and extract sides. A photo helps prevent them being swapped or reversed.

Remove the loaded filters carefully

Avoid shaking collected dust into the unit or room. Place used filters straight into a bag. If the manual permits vacuuming or cleaning a reusable element, follow that exact method; do not wash a disposable filter or refit a damaged one.

Check the accessible filter area

With the unit safely isolated, look for obvious debris, damaged seals, staining or a filter that was not seated against its frame. Do not dismantle fans, the heat exchanger or internal electrical components as part of a routine filter change.

Fit the replacement in the correct direction

Follow the airflow arrow and position shown in the manual. The filter should sit flat with no folded edge or obvious bypass gap. Refit the access panel fully so its seal can work as intended.

Restart and reset only the maintenance reminder

Use the documented restart procedure. If the manual tells the user to reset a filter counter, do so. Do not change fan speeds, boost times, balancing values or installer parameters to clear an unrelated warning.

Record what was done

Write down the date, filter reference, source, condition of the removed filters and any warning displayed. Retain the receipt and a photograph if the system forms part of a retrofit handover or property maintenance file.

What not to disturb during routine maintenance

The ceiling or wall valves that deliver and extract air are normally set during commissioning. Their visible position may look adjustable, but turning the centre disc can alter the airflow. The same applies to installer menus, fan curves and balancing values inside a controller. Cleaning around an accessible terminal is different from changing its commissioned setting.

White ceiling ventilation terminal in a finished room
Keep accessible terminals clear, but do not alter their commissioned position. Photo by tommao wang on Unsplash, used under the Unsplash Licence.

Also avoid treating a filter change as a full service. A competent service may include checks on the heat exchanger, fans, condensate drainage, casing seals, controls, duct connections and airflows. The exact scope should follow the manufacturer and the system design. If the home has undergone airtightness work, insulation, window replacement or internal alterations, the ventilation arrangement may need to be reviewed rather than simply cleaned.

When a filter issue needs professional investigation

Arrange technical help if the unit cannot be safely accessed, the correct filter cannot be identified, or the warning returns unusually soon after a documented replacement. Other signs that deserve investigation include:

  • noticeably weaker supply or extract airflow after the filters have been fitted correctly;
  • new rattling, grinding or persistent fan noise;
  • a damaged filter seal, warped access panel or evidence of air bypassing the filter;
  • water, repeated condensate alarms or staining inside or beneath the unit;
  • persistent odours that do not clear after the correct filter maintenance;
  • mould, recurring condensation or humidity symptoms that suggest the ventilation strategy is not working as expected;
  • unknown or altered ceiling-valve positions, fan speeds or installer settings; or
  • a significant change to the property that could affect airflow or pressure balance.

A filter replacement and an airflow test answer different questions. The filter task restores the specified consumable component. Ventilation airflow testing and commissioning checks whether the system is delivering and extracting air at the intended rates and whether the settings are properly recorded.

Homeowner task or specialist task?

TaskUsually suitable for an informed occupierUsually needs a competent technician
Check the manual, filter reminder and maintenance dateYes, where documents and controls are accessibleIf the documentation or control access is missing
Replace approved filtersYes, if the manufacturer describes it as a user taskIf access is unsafe, electrical covers must be removed or the filter cannot be identified
Keep external grilles and internal terminals visibly clearBasic visual check onlyBlocked ductwork, damaged terminals or inaccessible external grilles
Clean fans or remove the heat exchangerNo, unless the manufacturer expressly provides a user procedureFollow the service instructions and required competence
Change fan speeds, valve positions or balancing settingsNoMeasure, adjust and document the airflows
Investigate condensation, water or repeated alarmsRecord the symptom and stop if the manual requiresDiagnose the unit, drainage and wider ventilation system

What to keep in the MVHR maintenance record

A useful record is short enough to maintain and detailed enough for the next occupier or technician. Keep it with the ventilation manual and the wider retrofit handover pack. Record:

  • unit make, model, serial number and location;
  • approved filter reference for each position;
  • inspection and replacement dates;
  • condition of the removed filters and any unusual difference between them;
  • warning codes or symptoms before and after maintenance;
  • who completed the task and where the filters were obtained; and
  • any professional service, airflow measurement or corrective work.

This record helps distinguish a normal consumable change from a recurring defect. It also reduces the chance of the wrong filters being fitted after a house move, change of managing agent or staff handover in rented accommodation.

MVHR filter maintenance FAQs

Can I vacuum an MVHR filter instead of replacing it?

Only if the manufacturer says that the particular filter is reusable or may be vacuumed. Cleaning a disposable filter can damage its media and does not necessarily restore its specified performance. Follow the manual and replace damaged or non-reusable filters.

Can I fit a higher-grade filter to improve indoor air quality?

Not without checking compatibility. A different filter can have a different pressure resistance and may affect airflow or fan operation. Use the approved reference or obtain written advice from the unit manufacturer or a competent ventilation specialist.

Should I switch the MVHR system off permanently if filters are dirty?

No. Continuous systems are designed to provide ongoing ventilation. Follow the unit’s documented shutdown procedure for maintenance, replace the correct filters promptly and restart as instructed. If the unit cannot run safely, seek technical advice rather than leaving the home without its intended ventilation.

Why does the filter warning return after replacement?

The reminder may not have been reset, the replacement may be incorrect or badly seated, or the warning may indicate something other than elapsed time. Check the manual. If the alert returns unusually quickly, record it and arrange investigation instead of repeatedly resetting it.

Does changing filters mean the MVHR system has been serviced?

No. Filter replacement is one maintenance task. A service may involve the heat exchanger, fans, condensate drainage, seals, controls and airflows, depending on the manufacturer and system. Commissioning or recommissioning also requires measurements and documented settings.

Technical sources

Need the ventilation system assessed, tested or brought back into balance?

AEG Construction provides ventilation and indoor air-quality support as part of coordinated retrofit and building-performance work. If routine filter maintenance has exposed recurring airflow, moisture or control issues, the wider system may need a measured review.

Explore ventilation and indoor air-quality services
HTML Snippets Powered By : XYZScripts.com