AEG Construction Ltd

AEG Construction Ltd delivers compliant whole-house retrofit, funded energy upgrades and sustainable construction solutions, supporting properties across the UK with future-ready, energy-efficient outcomes.

icon_widget_image Mon – Fri: 9AM – 12PM / 1PM – 5PM icon_widget_image Bateman Court, Bateman St, Derby DE23 8JQ, United Kingdom icon_widget_image 01332 389 311 icon_widget_image info@aegconstruction.co.uk
Samsung air source heat pump installed at a residential property in Derby by AEG Construction
Derby-based low-carbon heating specialists

Air Source Heat Pump Installation in Derby

Planning a heat pump installation in Derby or Derbyshire? AEG Construction helps homeowners explore air-to-water heat pumps, property suitability, heating system upgrades and Boiler Upgrade Scheme support. See our genuine Samsung heat pump installation in Derby and request a tailored assessment for your home.

  • Derby & Derbyshire
  • Heat-loss-led system design
  • Real local installation example
  • Funding guidance
Derby officeBateman Court, Derby DE23 8JQ
Real Derby projectResidential Samsung ASHP installation
Whole-house approachHeating, insulation, controls & heat loss
Funding reviewBUS eligibility subject to current rules
Heat pump installers in Derby

Professional Air Source Heat Pump Installations for Derby Homes

An air source heat pump (ASHP) transfers heat from outside air into a building. In an air-to-water system, this heat supplies radiators, underfloor heating and, with a suitable cylinder, domestic hot water. Unlike a conventional boiler, a well-designed heat pump uses electricity to move heat instead of generating it entirely by burning fuel.

AEG Construction supports homeowners considering air source heat pump installation in Derby, Derbyshire and nearby East Midlands locations. We look at the property as a whole: insulation, heat loss, room-by-room heat requirements, radiators, hot water, outdoor-unit positioning and controls.

The right system depends on your home and usage, not simply on the size of your existing boiler. A site assessment and appropriate design are essential before a final specification or quotation.

Outdoor Samsung air source heat pump unit fitted for a Derby residential heating project
Actual air source heat pump installation shown in AEG's Derby project documentation.
How heat pumps work

How Does an Air Source Heat Pump Work?

Air source heat pumps can extract usable heat from the outdoor air even in cold UK weather. System efficiency varies with outdoor temperature, the heating system and the flow temperature required.

01

Heat is collected

The outdoor unit absorbs low-temperature energy from the surrounding air.

02

Refrigerant is compressed

A refrigeration circuit raises the temperature so that heat can be transferred into the home.

03

Heat is distributed

The system supplies properly designed radiators or underfloor heating.

04

Controls manage comfort

Appropriate controls help regulate room temperatures and hot-water preparation.

Air-to-water versus air-to-air: This page focuses on the air-to-water installations used for central heating and hot water. Air-to-air heat pumps are different systems and currently have different BUS grant values.
Our installation services

Air Source Heat Pump Installation Process in Derby

Our heating upgrade process is built around suitability, system design and a clear handover — rather than a one-size-fits-all heat pump package.

01

Initial enquiry and heating review

Tell us your Derby-area property type, existing heating fuel, hot-water needs and upgrade objectives. We discuss possible next steps and available routes.

02

Property and heat-loss assessment

Suitable assessments consider room-by-room heat loss, fabric performance, radiator capacity, pipework, hot-water demand and space for the outdoor unit.

03

System selection and design

The proposed system is sized around the building's demand, with a review of temperature settings, controls, cylinder and any required emitter upgrades.

04

Grant and cost review

Where relevant, the team discusses the Boiler Upgrade Scheme, eligibility requirements and how any eligible support affects the overall proposal.

05

Installation and commissioning

Installation covers unit positioning, connections, safety checks and commissioning in accordance with the applicable system and scheme requirements.

06

Controls and handover

Homeowners are shown how to use controls, hot-water schedules and heating settings, with any applicable documentation and aftercare guidance.

Suitability and efficiency

Are Heat Pumps Suitable for Older Derby Houses?

Many existing homes can be suitable for an air source heat pump, including properties that already use gas, oil or LPG heating. The important questions are how much heat the building loses, whether the radiators can deliver that heat efficiently, and whether suitable external space and electrical provision are available.

An effective design may involve improved insulation, larger radiators, a correctly sized hot-water cylinder or changes to controls. Not every property requires all of these measures.

  • Energy efficiency: heat pumps can deliver multiple units of heat per unit of electricity, depending on operating conditions.
  • Lower-carbon heating: an electrically powered alternative to direct fossil-fuel combustion.
  • Home comfort: consistent space heating with appropriately designed heat distribution.
  • Whole-house retrofit: can be considered alongside insulation, solar PV and other home improvements.
An air source heat pump does not automatically reduce every household's running costs. Savings depend on your previous heating fuel, unit prices, actual system efficiency, insulation and how the system is used.
Indoor heat distribution components in AEG Construction's Derby Samsung heat pump project
Indoor heating components matter as much as selecting the outdoor heat pump.
Heat pump prices explained

Air Source Heat Pump Installation Cost in Derby

How much does an air source heat pump cost to install in Derby? The honest answer is that it depends on your property and the extent of the heating changes required. A replacement system may involve more than the outdoor unit: there can also be work on radiators, pipework, hot-water storage, electrics and controls.

As a UK-wide guide, the Energy Saving Trust estimates a typical air source heat pump installation at around £12,000 before grants. This is an industry guide, not an AEG Construction quotation; some projects cost less and others more.

To estimate the cost for your home, the specification must account for heat loss, system size, installation access and any extra building or heating work. Eligible grant support may reduce the amount the property owner pays.

Independent UK benchmark~£12,000

Typical air source heat pump installation cost reported by Energy Saving Trust, before grants and property-specific adjustments.

  • Heat pump and selected components
  • Labour, installation and commissioning
  • Potential radiator or cylinder changes
  • Individual property requirements

Source: Energy Saving Trust — Heat pumps: costs and savings. Guide figure only; no fixed price or savings guarantee.

Boiler Upgrade Scheme • November 2026

£7,500 and £9,000 Boiler Upgrade Scheme Grants for Eligible Heat Pumps

The Boiler Upgrade Scheme (BUS) is a government-backed programme for eligible low-carbon heating installations in England and Wales. Grant funding is assessed against the property, replacement heating system, technology and current scheme rules.

Standard eligible installation£7,500

Air-to-Water Heat Pump Grant

Standard BUS support towards a qualifying air-to-water heat pump installation. The grant is not an automatic cash payment to every applicant and is subject to approval and scheme requirements.

Who can apply for the Boiler Upgrade Scheme?

  • Eligible owners of homes and qualifying non-domestic properties in England or Wales, including certain landlords.
  • Properties replacing eligible existing heating systems, subject to exclusions and scheme requirements.
  • Installations completed by an MCS-certified installer; the installer applies for the grant on the owner's behalf.
  • Eligible systems that meet relevant technical standards, with the required documentation and property permissions.

What should you check before proceeding?

  • Whether your current system uses mains gas, oil, LPG or another fuel.
  • Whether the property is connected to the mains gas grid.
  • The proposed system type and whether your property meets BUS rules.
  • Grant timing, eligibility, installer accreditation and a clear written quote.
Important: £9,000 is not available to every off-gas-grid property. It applies to specific qualifying heating replacements. Grants and policy can change. Verify at GOV.UK and Ofgem before making a decision. See also our Boiler Upgrade Scheme information.
Real AEG project • Derby

Air Source Heat Pump Installation Derby: Samsung Residential Case Study

To see what an actual local installation can involve, explore this AEG Construction residential project in Derby. The original project page documented the Samsung outdoor unit, heating-system integration and Honeywell controls. The case study has been incorporated here as part of our consolidated installation service page.

Completed Samsung air source heat pump installation at a Derby residential property
After installation — image from AEG's existing Derby ASHP case study.

Derby heat pump project overview

AEG's project documented a Samsung air source heat pump installed at a residential property in Derby, with connections to the property's heating infrastructure and supporting internal heating components. The project aimed to provide a practical low-carbon heating alternative with appropriate temperature controls and hot-water provision.

LocationDerby, England
ManufacturerSamsung
Original listed systemAE160RXYDEG/EU
Original listed control moduleMIM-EO3CN
Heating controlsHoneywell controls
Original case-study date30 July 2025 (submission)

These details are reproduced from the supplied AEG case-study content. They are not a specification recommendation for other homes. No measured reduction in bills or emissions was supplied, so none is claimed here.

Local service area

Heat Pump Installers in Derby, Derbyshire and the East Midlands

AEG Construction is based in Derby and discusses suitable home energy improvement projects across Derbyshire and neighbouring locations. Whether you are looking for air source heat pumps in Derby, a heat pump installer in Nottingham or advice about a property near Stafford, start with your postcode so we can confirm local service availability.

Local property assessment helps establish heating demand and whether a low-carbon heating installation is the right solution, rather than recommending an unsuitable system simply because a particular grant exists.

Areas we can discuss for project enquiries

  • Derby
  • Derbyshire
  • Nottingham
  • Nottinghamshire
  • Stafford
  • Burton upon Trent
  • Ilkeston
  • Belper
  • Swadlincote
  • Ripley
  • Ashbourne
  • Chesterfield
  • East Midlands

Service coverage is project- and availability-dependent. Inclusion in this list does not guarantee an installation slot or grant eligibility.

Why AEG Construction

One Heating Upgrade Team, a Practical Whole-House Approach

Choosing an installer is about more than the heat pump brand. Good system design, correct sizing and a clear installation plan matter to comfort and efficiency after handover.

✓

Derby project experience

Our genuine Derby Samsung installation gives homeowners a local example of an installed outdoor unit and supporting heating work.

✓

System-first advice

Discuss radiators, heat loss, hot-water capacity and controls, rather than treating every home as identical.

✓

Retrofit perspective

Heating changes can be considered with insulation, ventilation, building-fabric condition and other home energy upgrades.

For wider property planning, read AEG's heating upgrade roadmap for Derby homes or explore solar panel installation as a separate energy measure.

Heat pump FAQs

Frequently Asked Questions About Air Source Heat Pumps in Derby

Clear answers to common questions before choosing an air source heat pump installer or requesting a quote.

How much does air source heat pump installation cost in Derby?

Costs vary with property size, heat loss, radiator and cylinder requirements, site access and the system selected. Energy Saving Trust gives around £12,000 as a typical UK installation benchmark before grants; a property-specific assessment is needed for an AEG quote.

Is there a £7,500 heat pump grant in Derby?

Yes. Under the current Boiler Upgrade Scheme, qualifying air-to-water heat pump installations in England and Wales can receive a £7,500 grant, subject to the property and installer meeting the programme's requirements.

Who qualifies for the £9,000 heat pump grant?

Under current BUS rules, eligible off-gas-grid properties replacing oil or LPG heating with a qualifying air-to-water heat pump can receive £9,000. The uplift is currently due to end on 31 March 2027. Eligibility must be confirmed before installation.

Can I replace a gas boiler with an air source heat pump?

Often, yes. The correct design depends on heat loss, radiator suitability, hot-water needs, outside space and your electrical supply. A gas connection would not normally qualify for the additional off-gas-grid BUS uplift.

Do air source heat pumps work during UK winters?

Yes. Modern heat pumps can extract useful energy from outdoor air in cold weather, although efficiency and output depend on conditions and the model selected. Accurate heat-loss calculations are essential when sizing the system for winter demand.

Will an air source heat pump reduce my energy bills?

It may, but savings are not guaranteed. Compare the electricity price, the heating fuel being replaced, system performance, insulation and usage patterns. A well-designed system can be efficient even where overall running costs differ from expectations.

Do I need new radiators or underfloor heating?

Not always. Existing radiators may work if they can supply the required heat at appropriate flow temperatures. A room-by-room assessment identifies which emitters, if any, need upgrading.

Will a heat pump provide heating and hot water?

An appropriately designed air-to-water heat pump can supply central heating and domestic hot water, usually with a compatible hot-water cylinder. System configuration and your family's hot-water demand determine the final specification.

Do I need planning permission to install a heat pump in Derby?

Some domestic installations fall under permitted-development rules, but conditions and exceptions can apply, including noise-related requirements, building type and protected locations. Check the current planning position for your property before work begins.

How noisy is an air source heat pump?

Outdoor units make noise while operating, and sound levels depend on the equipment, installation position and operating conditions. A suitable location and an appropriate noise assessment are important, especially near neighbouring homes.

How long does an air source heat pump installation take?

Timeframes depend on heating-system alterations, cylinder and radiator work, site access and commissioning needs. Your installer should provide a project-specific schedule after assessment instead of assuming every house takes the same number of days.

Can heat pumps work with solar panels?

Yes. A heat pump can operate in a home with solar PV. Solar electricity may offset some consumption when generation and heating demand overlap, but winter heating demand does not always coincide with peak solar production.

Does AEG Construction cover Nottingham and Stafford?

AEG is based in Derby and can discuss relevant heating or retrofit enquiries in Nottingham, Stafford and neighbouring areas. Confirm your property's postcode and the team's current availability before making plans.

How do I request a heat pump assessment with AEG?

Use the AEG home upgrade enquiry form, select the air source heat pump service where available and provide information about your property, existing heating and postcode. The team can review your requirements and follow up about suitable next steps.

AEG Construction • Derby

Start Your Air Source Heat Pump Installation Enquiry

Planning to replace a gas, oil or LPG heating system? Share your postcode, property information and current heating setup. We can discuss potential air source heat pump suitability, installation requirements and relevant funding routes.

An enquiry does not guarantee installation availability, a grant or a specific running-cost outcome.

Independent information: GOV.UK — grant values · Ofgem — eligibility and process · Energy Saving Trust — costs and running costs. Information reviewed 4 November 2026; verify changes before relying on grant figures.

HTML Snippets Powered By : XYZScripts.com